Topics:

·        You don’t need enable the 5881 receiver.

·        You don’t need enable the 4219/4229 hardwire expanders.

·        You don’t need enable the 4204 relay modules.

You don’t need enable the 5881 receiver.

When you program wireless zones into zone programming, the panel automatically enables the RF receiver at address 00. (Regardless of what zone number is programmed)

You don’t need enable the 4219/4229 hardwire expanders.

When you program a zone as Input-Type AW in zone programming, the panel automatically enables the appropriate zone expanders.

Zones 9-16 = address 07

Zones 17-24 = address 08

Zones 25-32 = address 09

Zones 23-40 = address 10

Zones 41-48 = address 11

For example, If you program zones 15, 16, 17, 18 as AW zones, the panel enables (2) 4219 expanders: address 07 and 08.

You don’t need enable the 4204 relay modules.

When you map an output as a relay in *79, the panel automatically enables the appropriate zone relay module based on the address you select in *79.