Topics:

·        How to properly access the schedule programming menu:

·        Programming for Auto-arm and Auto-disarm:

·        Set the clock!!!

·        Detailed program information:

How to properly access the schedule programming menu:

From outside programming, key your [installer code] + # + 64

(The master code may also be used)

Programming for Auto-arm and Auto-disarm:

Once inside the schedule menu, enter the following information:

Ø       Select a schedule number (any entry is fine)

Ø       Select an event:

o        04 = Forced Stay Arming

o        05 = Forced Away Arming

o        06 = Disarming

Ø       Select a partition:

o        1 = Partition 1

o        2 = Partition 2

o        3 = Common area

o        0 = all partitions.

Ø       Select the time you want the action to take place

Enter a “1” under each day that you want.

Ø       Select a repeat option (1 = repeat weekly; 0 = will function this week only)

Ø       Randomize – suggest select 0 so that arm/disarm is not randomized.

Set the clock!!!

After programming scheduling functions, make sure the system clock is set correctly so that the arm/disarm events will take place at the proper time.

Set the clock by keying your code # 6 3

Detailed program information:

This link will show documentation on programming auto arming/disarming.

Schedule setup