|
Blank Display on Keypad/Addressing Keypad (ID:12761466)
|
|
Excerpt From This FAQ:
My Keypad displays OC, is blank, or flashing between 2 numbers (00-31 or 17-00)
...
|
|
How Do I add/change/delete User Codes? (ID:12766466)
|
|
Excerpt From This FAQ:
The following will explain how to add, change, or delete the master or user codes on the Vista-15P.
...
|
|
Duress Code Programming (ID:12780466)
|
|
Excerpt From This FAQ:
The following will explain how to add a duress code the Vista-15P or 20P.
Watch out for: ...
|
|
How can I clear a low battery display? (ID:12793466)
|
|
Excerpt From This FAQ:
This Document will describe how to Clear a Low Battery Message
...
|
|
Programming Relay to Reset 4-Wire Smoke Detectors (ID:12802466)
|
|
Excerpt From This FAQ:
The following will explain how to setup a 4204 relay module for 4-wire smoke reset.
Watch o ...
|
|
Troubleshooting Check 100 (ID:12825466)
|
|
Excerpt From This FAQ:
The Check 100 message indicates a problem with a 5881 wireless receiver.
Watch out for: ...
|
|
How do I program Wireless Zones (ID:13585466)
|
|
Excerpt From This FAQ:
This FAQ will answer general questions on programming wireless and 5881-receiver setup. It w ...
|
|
How do I program user Codes? (ID:13680466)
|
|
Excerpt From This FAQ:
The following will explain how to add, change, or delete the master or user codes on the Vista-15P.
...
|
|
I am getting a bF on the keypad, why? (ID:13737466)
|
|
Excerpt From This FAQ:
bF is an abbreviation for “backup failure”
The following will explain why you may get a bF message ...
|
|
My alarmnet radio is not reporting to cs, why? (ID:13756466)
|
|
Excerpt From This FAQ:
The following will explain the proper setup for Alarmnet on the Vista-10/15/20 control panels.
&nbs ...
|
|
My keypad is displaying a Check 70 (ID:13768466)
|
|
Excerpt From This FAQ:
The following will explain zone 70: Bell supervision on the Vista-10/15/20/30 series controls
...
|
|
My keypad won't take any commands, why? (locked up) (ID:13772466)
|
|
Excerpt From This FAQ:
Keypad has a display but commands do not work, can only get 4 keystroke beeps.
These symptoms indic ...
|
|
My Panel won't dial out, Why? (ID:13784466)
|
|
Excerpt From This FAQ:
My panel won’t report signals to my central station receiver.
...
|
|
Some events report, but not others. (ID:13805466)
|
|
Excerpt From This FAQ:
My panel reports some signals to central station, but not others.
This FAQ wi ...
|
|
The keypad is displaying busy-standby E4 or E8 (ID:13820466)
|
|
Excerpt From This FAQ:
The following will explain what an “E4”, “E8”, or “Receiver Setup Error” message means and how to co ...
|
|
What do I do for 1st Time Downloading? (ID:13856466)
|
|
Excerpt From This FAQ:
This document explains how to set a panel up for first-time downloading.
Contents…
...
|
|
What does EA mean? (ID:13871466)
|
|
Excerpt From This FAQ:
The following will explain Exit Error Alarm.
...
|
|
How do you direct connect to this panel? (ID:13901466)
|
|
Excerpt From This FAQ:
This document explains how to do a local download to a panel that does not support the 4100Sm serial ...
|
|
I programmed my 5804's in and they confirmed, but won't work (ID:13923466)
|
|
Excerpt From This FAQ:
The following will explain why a keyfob may not work on your system:
Watch out for: ...
|
|
Panel won't power up on battery only, Why? (ID:13931466)
|
|
Excerpt From This FAQ:
The following will explain the battery Saver feature of the Vista-15P and 20P.
...
|
|
How do you program the test timer? (ID:13932466)
|
|
Excerpt From This FAQ:
The following will explain how to enable the test report on the Vista-15P/20P.
...
|
|
How do you enable the 4219 expander and Wireless Receiver? (ID:13938466)
|
|
Excerpt From This FAQ:
The following will explain enabling expanders (RF/hardwire/relay) on the Vista-15P and 20P.
...
|
|
I have a DC on my keypad, what does this mean? (ID:13940466)
|
|
Excerpt From This FAQ:
The following will explain what DC means on the keypad display.
...
|
|
I am getting a check on a hardwired zone, why? (ID:14006466)
|
|
Excerpt From This FAQ:
The following will explain why a hardwire zone may go into check.
...
|
|
What do I need to program for this panel to report? (ID:14008466)
|
|
Excerpt From This FAQ:
I am taking over this system. What do I need to program?
This document will ...
|
|
I am getting a check 107 or 108, why? (ID:14169466)
|
|
Excerpt From This FAQ:
The following will explain the causes and solutions for a Check 107 or 108 messages.
Watch ...
|
|
How do I enable my panel for auto arming? (ID:14171466)
|
|
Excerpt From This FAQ:
The following will explain how to program the control panel for auto arming.
Topics: ...
|
|
My panel powered up armed and I can't disarm it! (ID:14183466)
|
|
Excerpt From This FAQ:
The following will explain what to do when you arm the system and do not have a code to disarm the s ...
|
|
My customer has a DSL line, What do I need to do? (ID:14193466)
|
|
Excerpt From This FAQ:
The following will explain DSL and how it interacts with alarm control panels.
...
|
|
How do I calculate for Battery Backup? (ID:14206466)
|
|
Excerpt From This FAQ:
The following will explain how to calculate the required battery backup for your control panel.
&nb ...
|
|
Using only a pager to communicate (ID:14388466)
|
|
Excerpt From This FAQ:
Q. Can my Vista-20SE send Pager information ONLY (without reporting to the Central Station)?
...
|
