|
How to Clear Check 09 (ID:12422466)
|
|
Excerpt From This FAQ:
The Check 09 message indicates a problem with an expansion device. This could be a 5881 wireless rec ...
|
|
How do I program the duress code? (ID:12426466)
|
|
Excerpt From This FAQ:
The following will explain how to add a duress code on the Vista-20se.
&nbs ...
|
|
User Code Programming (ID:12427466)
|
|
Excerpt From This FAQ:
The following will explain how to add, change, or delete the master or user codes on the Vista-20se. ...
|
|
Low Battery (ID:12428466)
|
|
Excerpt From This FAQ:
This Document will describe how to Clear a Low Battery Message
...
|
|
How Do I add/change/delete User Codes? (ID:12741466)
|
|
Excerpt From This FAQ:
The following will explain how to add, change, or delete the master or user codes on the Vista-20se. ...
|
|
How do I program Wireless Zones (ID:13694466)
|
|
Excerpt From This FAQ:
This FAQ will answer general questions on programming wireless and 5881-receiver setup on a Vista ...
|
|
I am getting a bF on the keypad, why? (ID:13736466)
|
|
Excerpt From This FAQ:
bF is an abbreviation for “backup failure”
The following will explain why you may get a bF message ...
|
|
My alarmnet radio is not reporting to cs, why? (ID:13755466)
|
|
Excerpt From This FAQ:
The following will explain the proper setup for Alarmnet on the Vista-10/15/20 control panels.
&nbs ...
|
|
My keypad is displaying a Check 70 (ID:13767466)
|
|
Excerpt From This FAQ:
The following will explain zone 70: Bell supervision on the Vista-10/15/20/30 series controls
...
|
|
My keypad won't take any commands, why? (locked up) (ID:13771466)
|
|
Excerpt From This FAQ:
Keypad has a display but commands do not work, can only get 4 keystroke beeps.
These symptoms indic ...
|
|
My Panel won't dial out, Why? (ID:13783466)
|
|
Excerpt From This FAQ:
My panel won’t report signals to my central station receiver.
...
|
|
Some events report, but not others. (ID:13804466)
|
|
Excerpt From This FAQ:
My panel reports some signals to central station, but not others.
This FAQ wi ...
|
|
The keypad is displaying busy-standby E4 or E8 (ID:13819466)
|
|
Excerpt From This FAQ:
The following will explain what an “E4”, “E8”, or “Receiver Setup Error” message means and how to co ...
|
|
What do I do for 1st Time Downloading? (ID:13855466)
|
|
Excerpt From This FAQ:
This document explains how to set a panel up for first-time downloading.
Contents…
...
|
|
What does EA mean? (ID:13870466)
|
|
Excerpt From This FAQ:
The following will explain Exit Error Alarm.
...
|
|
What do I need to program for this panel to report? (ID:14018466)
|
|
Excerpt From This FAQ:
I am taking over this system. What do I need to program?
This document will ...
|
|
I am getting a check on a hardwired zone, why? (ID:14024466)
|
|
Excerpt From This FAQ:
The following will explain why a hardwire zone may go into check.
...
|
|
My panel powered up armed and I can't disarm it! (ID:14219466)
|
|
Excerpt From This FAQ:
The following will explain what to do when you arm the system and do not have a code to disarm the s ...
|
|
How do I calculate for Battery Backup? (ID:14253466)
|
|
Excerpt From This FAQ:
The following will explain how to calculate the required battery backup for your control panel.
&nb ...
|
|
My customer has a DSL line, What do I need to do? (ID:14256466)
|
|
Excerpt From This FAQ:
The following will explain DSL and how it interacts with alarm control panels.
...
|
|
Using only a pager to communicate (ID:14383466)
|
|
Excerpt From This FAQ:
Q. Can my Vista-20SE send Pager information ONLY (without reporting to the Central Station)?
...
|
